glide castors for office chair factory|Office chair for employees to alleviate sedentary occupational diseases

The extension of service did not bring me considerable wealth, but it brought me personal and sensible occupational diseases. This is probably the biggest sadness of working people like me. From graduation to now, the nature of my work has always been to sit for a long time. Although I have become a small leader after several years, the workload is still increasing with the expansion of the company.

Some time ago, during the physical examination of the company, the doctor told me that there was something wrong with my spine and there was a slight scoliosis. I didn't think so. I went home and checked. Only then did I know that my long-term back pain was related to this slightly Scoliosis Spine. So I immediately turned back to the hospital. The doctor told me that this slight lateral bending would not have a great impact on the body, but we must pay attention to the future life, especially the habit of sitting posture, so as to avoid that the bad sitting posture for a long time will put more pressure on the spine and make the lateral bending more serious.

After thinking about it, I decided to buy a chair that really helps my spine health and relax my body. Finally, I bought a flagship S8 Max ergonomic chair of MOGA. It feels good to try it. Let's have a brief chat with you.

Installation and commissioning

The installation of the MOGA S8 Max ergonomic chair is very simple. I have bought the so-called boss chair and E-sports chair at various prices before. When I first got it, I felt that it was really difficult to install. People with weak hands-on ability will be blind. All parts of the S8 Max ergonomic chair are wrapped in a box by category, which is very convenient to take.

The box comes with a five-year warranty card and instructions, but I'm not used to reading these things.

Placed on the upper layer of the box is the integrated seat back, which includes two parts: back and waist.

Below are the assembled chair surface and armrest, and all screws are installed.

All I have to do is screw the two parts together, then connect them to the pulley base with a pneumatic rod, and finally install an independent headrest. It took about five minutes in total.

This is what the MOGA s8max ergonomic chair looks like after assembly. From top to bottom, it is the head restraint back support area, lumbar restraint, seat, foot support and chair wheel group. The color I chose is glacier blue, which is much more fashionable than the traditional black gray office chair, and its appearance is online.

Product details

There are many ergonomic chairs on the market, but most of them are upgraded models of boss chairs or E-sports chairs. It is comfortable to sit, but the support for the human body is far from as good as expected. The MOGA can get the support of a large number of users, and naturally has its own uniqueness. Let's talk about the interesting designs of the MOGA S8 Max ergonomic chair.

The overall material of S8 Max ergonomic chair is not a relatively common and cheap PP plastic, but 70% nylon + 30% glass fiber. The strength and toughness of the material are well guaranteed. It is very important to ensure that the product will not be defaced or damaged during long-term use, especially in crowded office areas.

The first is the head restraint. The head restraint of S8 Max ergonomic chair is no longer an adjustable design integrated with the seat back. The height and angle can be adjusted by itself to meet the needs of people with different heights and head shoulder distances. It can carry out two position lifting, and the pillow surface can rotate freely. At the same time, it can also carry out five gear cantilever lifting, so that everyone can find the height and angle of the headrest that best fits their cervical spine.

This design can support the weight of my head at the most comfortable angle, so that I can relax my stiff shoulder and neck muscles and have a pleasant rest after work.

The chair back is no longer the overall support surface, but divided into back support and lumbar support, which is more in line with the spine curve of the human body. You should know that the human spine is not completely straight, but there is an obvious S-shaped curve with the waist and abdomen. The waist pillow of S8 Max ergonomic chair is just supported at the S bend, so that the waist is no longer directly stressed, and the top waist feeling is obvious.

The seat back also has the function of recline adjustment. There are four different pressure adjustment gears. Different degrees of tightness are used to adapt to the weight of different users. They can adapt to the weight of less than 50kg, 50-70kg, 70-90kg and more than 90kg respectively. In this way, people with light weight can lean back without effort, and people with heavy body can't feel empty when leaning back, which is a very considerate function.

The whole lumbar support also adopts an adjustable design, which can be adjusted by rotating the cross bar, so that the whole lumbar support can change the angle with the change of the waist, and stick to the waist as closely as possible, so as to provide a better and more comfortable support for the body and reduce the pressure on the spine.

The part of the chair surface is more interesting. There is no hard object to support, but the arched mesh frame design is adopted, that is, a layer of high elastic and breathable mesh structure is covered on the frame, and the surface is flocked, which can not only fit the curve of the hip, but also ensure the ventilation effect, so as to avoid the embarrassing scene of the skin sticking to the chair surface or the pants soaking with sweat in summer.

To be honest, this layer of cloth doesn't look strong, so I checked it specially. Only then did I know that it is K + R flocking special mesh imported from Germany. After 120 ° heat shrinkage process, the translucent fabric design can withstand up to 135kg without deformation. It is very tough.

The professional name of this chair seat is boneless mesh frame cushion, which is also one of the core technologies of MOGA. Different from the common sponge cushion on the market, the tension distribution of mesh cushion is uneven. Simply put, it is the most comfortable when sitting, because the pressure value in the center of the mesh is low, and the mesh wraps the hips from both sides to reduce the discomfort of the waist and hips. When your hips tilt to the left or right, the tension pressure value of the mesh surface at the edge of the seat cushion is high, which will exert a squeezing force on the muscles. This force will make you feel slightly uncomfortable, urge you to return to the correct sitting position as soon as possible, and naturally straighten your pelvis and spine. In this subtle way, you can maintain the correct sitting position and avoid scoliosis.

Below the chair surface is the lifting rod, the core component of the lifting chair. It is very important to know the quality of the pressure rod, which is not only related to the comfort of use, but also related to the personal safety of users. The pressure bar of S8 Max ergonomic chair is an imported pressure bar, which has passed the four level quality certification of Rhine TUV. Many people may not know much about this rating. In short, many products on the market are level 3 or even level 2. The higher the rating, the better. Level 4 is the highest level of quality certification.

There is also this intimate foot support. This function is almost standard on all kinds of comfortable seats. After all, for office workers, taking a nap after lunch is the best way to relax. Unlike other brands, the foot rest of the MOGA S8 Max ergonomic chair adopts a hidden design, which can be gently pulled out when necessary. Moreover, the patented single pole design is also used here, which can be easily taken out or stored without forking the legs very open.

The surface of the foot support should be made of soft PU material. I am 174CM tall. When I rest, the foot support can just bear the weight of the lower leg. There will be no sense of suspension. It is still relatively comfortable. After checking on the Internet, the foot support here is not completely flat, but adopts a downward inclined design of about 30 °, which can better fit the curve of my lower leg when I lie down and will not cause a sense of compression on the muscles of my lower leg. This design detail is commendable.

The 5D armrest of S8 Max ergonomic chair is one of the most amazing functions for me. This humble little thing is not only comfortable to the skin, but also can carry out various deformations, which can meet the needs of different working conditions. For example, when I lie down to rest, I can turn the armrest outward slightly to give my arms a more spacious space; When I work, I can make the armrest lean forward and lean inward, which is convenient for me to place my elbows and operate the computer; I can fully support my elbow when I brush the armrest. It has to be said that the rotation design up to 270 ° is indeed a design highlight.

Finally, there is the chair wheel group at the bottom. The chair wheel of the MOGA S8 Max ergonomic chair is a silent wheel, which adopts soft PU material. It will not cause great pressure on the ground, scratch the floor or ceramic tiles, and there will be no harsh squeak during movement. It is still very important for office use.

Adjustable design

A truly qualified ergonomic chair must be able to perfectly fit the human body curve. However, everyone's height, weight, fat and thin are completely different. It is obviously unrealistic to solve all problems with one chair. At this time, various adjustable designs are needed. All human contact surfaces of the MOGA S8 Max ergonomic chair can be adjusted freely according to our needs, and I am quite satisfied. In order to adapt to different heights, the back height of S8 Max ergonomic chair can be adjusted up and down, and the adjustment range is 10cm, which can adapt to various body shapes from 160-190cm, so as to ensure that your head can rest on the headrest.

It is also specially designed for size and body shape. The cushion of S8 Max ergonomic chair can also adjust the depth of front and rear seats to adapt to different thigh lengths, so that people with larger body can sit more comfortably.

It should be noted that there are three adjustment switches under the MOGA S8 Max ergonomic chair, which respectively control the tilt angle of the seat back, the front and rear movement of the seat cushion and the adjustment of the seat height. Generally speaking, after selecting the suitable mode, there is no need for secondary adjustment, so the operation is not complicated.

The armrests on both sides of the S8 Max ergonomic chair can not only tilt directly inside and outside, but also adjust the spacing between them left and right. For example, when a thinner person uses it, he can move the handrails on both sides inward to make the space more compact and convenient for placing elbows; When a fat person uses it, he can break the handrail outward to give more space for activities. The whole armrest can rotate 270 degrees. This design is still rare on the same type of chair and is more friendly to the user.

Then there is the foot support. Gently pull it out and turn it over. It takes no effort at all. If you look carefully, you can find that from the seat cushion to the foot support, it actually presents a complete radian. When I lie on the chair, I can be in a more comfortable natural drooping angle from the hip to the lower leg, and it will be more comfortable to sit up.

Finally, the collapsible design. The collapsible angle of the MOGA S8 Max ergonomic chair has reached 136 degrees, which is completely enough for the nap. With the elongated foot support, all parts have enough support after lying down, especially the waist has no uncomfortable sense of suspension.

Actual use

Let's talk about my physical condition. I am 174CM tall and weighs about 80kg. It can be seen that after sitting on the chair, all parts of my body can fit well on the surface of the chair without hanging or discomfort.

The side photos may be more obvious. The head and neck support, back support and the most critical lumbar support can fit the body well, and the height of both legs is also in a relatively relaxed and natural state.

Close up of lumbar support. Many E-sports chairs are equipped with a soft waist pillow. It's good to use at first. It will be flattened out after a long time. The waist pillow of the MOGA S8 Max ergonomic chair not only adopts the fabric design with low hardness, but also can be adjusted at various angles, which can fit and support the waist well and reduce the stress on the spine.

I'm used to leaning forward slightly when I'm in office, keeping enough contact between the back waist and the waist pillow, and keeping my back in a sitting position, so that a long time of computer office won't cause back pain.

If you feel a little tired after a long time in the above posture, you can push the chair forward and lean your whole body back on the chair completely, so that your back can be effectively relaxed.

The last part is the handrail. The multi angle adjustable design allows it to bear the weight of the elbow well. The soft handrail can also fit the contour of the muscle well without causing numbness and stiffness.

Finally, there is a comfortable photo of lying down. Although the S8 Max ergonomic chair can be dumped more greatly, I still prefer this slightly inclined angle, which is very suitable for closing my eyes after work or playing with my mobile phone. After all, fishing is also one of the skills that professional workers must know.

Product summary

At present, there are many kinds of chair products on the market, including various boss chairs, E-sports chairs, ergonomic chairs and massage chairs. Although it is exaggerated, I am still slightly disappointed after using several. Simply from the use effect, the publicity of many products are marketing slogans, so it's not very comfortable to sit up. This MOGA S8 Max ergonomic chair really gave me a big surprise. The core idea of the product is spine health. It uses multiple adjustable modules to adapt to the needs of different people in different environments, so as to reduce the pressure on the spine and avoid damage in daily work and life. In addition, it has a good appearance design and solid workmanship. In the future, it will be used for office fishing.